Home of the Jet-Away
Phone 417-858-8616

Hi-Tech Performance Parts

[Previous Page] [Next Page] [Up] [Home Page] [Mail]  

 Parts for sale here are NEW. Hi-Tech is your place to shop for Performance Jet Boat Parts!

 

NEW HPX HEADERS

 

 

$2,995.00

 Alternator Mounting Made Easy!

 BBC ALTERNATOR MOUNTING BRACKET

These brackets make alternator mounting on a BBC a snap. Puts alternator on the side of the engine where there is no interference with the headers on the back of the alternator. Gives plenty of room for using a mechanical fuel pump and makes a nice looking set up. These brackets do not flex.

$68.00 ea.

 

HI-HELIX STAINLESS STEEL RACE IMPELLERS

Developed and tested by Hi-Tech Performance/American Turbine

Ask us about them!

We have them in stock, NOW!

We keep impellers in stock for;

 Berkeley, American Turbine, Dominator,

Legend, Aggressor, Jacuzzi.

Others are available!


In Aluminum we stock Aggressor and American Turbine - $275.00

In Bronze, We stock Aggressor - $672.00

(when we can get them)

In Stainless Steel we stock American Turbine - $843.00

New Hi-Helix Stainless Steel $990.00

(with the veins reworked for Hi-Performance Racing) $1190.00


 

Transom Steering Kits

Includes Steering Tube, Steering Extension, Transom Ball Assembly & Swivel

$130.00

 

                                                                                                                                                                

 

Chrome one wire alternators

Alt Chrome one wire 0661.jpg (77409 bytes)

Alt Chrome one wire0662.jpg (78335 bytes)

$119.95 ea.

These beautiful alternators have a dual purpose regulator that

lets them be used as a one wire alternator, or on a three wire system.

Out of stock right now.

We  have Merisch and Dominator Intakes in Stock

 

These Intakes Are Available from us with a Six Piece Shoe Shim Kit, That FITS! We Make it!

Shoe Shim Kit 9967.jpg (54050 bytes)

This kit enables you to raise or lower your shoe depth from .030" to .300" by .030" increments at a time.

 

----------------

We also produce and sell Blank Shoes. You can drill and cut these to fit most any shoed pump that does not have a standard pattern.

Or they are great for machining an existing intake and shoeing it!

Blank Shoe 0002.jpg (77183 bytes)

Blank Shoe 9999.jpg (68699 bytes)

Blank Shoe 0001.jpg (69469 bytes)

$64.00 ea.

----------------

 

Ride Plates & Cradles Available too.

                                                                                                                                                            Cradle 9974.jpg (14289 bytes)      

                                                                                                                      TALL                                   SHORT                             J C BOWL                                                               

                                                                                                                                                            

                                                                                                                                                                Comparison

----------------

----------------

Model 12-S Dominator

 

IN STOCK

We stock American Turbine and Dominator Pumps and Parts

(both 10 1/4" & 10 1/2" models)

http://WWW.americanturbine.com

Call for Prices and Options

 ----------------

----------------

JETAWAY 937 x 600 pix.jpg (25255 bytes)
JETAWAY Pump Release

$1487.21

9 Vein Bowl Front

$681.85

9 Vein Bowl 

Back

Aggressor Pump Assy.

Call for Options

 

Hi-Tech Performance : Jet Away

image31.jpg (21772 bytes) image33.jpg (25595 bytes) Ultimate Wear Ring.jpg (55827 bytes) Prime-A-Jet 9819 new design 2.jpg (8824 bytes)
Droop Snoot

$275.00

Place Diverters

call for option prices

Ultimate Wear Ring

$124.00

PRIMEAJET   

$49.95

image34.jpg (30358 bytes) image36.jpg (103896 bytes) image41.jpg (28673 bytes) image37.jpg (30594 bytes)
Complete Cam Kits

Call for Prices

Complete Blower Setups

Starting at $1888.00

Pump Overhaul Kits

$236.00

Hi-Tech Jet Lube

$9.95

----------------

"THE SNOOT"

Cast Polished 204.jpg (46997 bytes)

Cast Polished 202.jpg (50655 bytes)

Cast Polished 206.jpg (43059 bytes)

Cast Polished 205.jpg (49351 bytes)

 

THE SNOOT Ken 2155.jpg (28160 bytes) THE SNOOT Ken 2154.jpg (33302 bytes)

This is another new innovative product brought to you by Hi-Tech Performance!

It can be used like a droop snoot, but it eliminates the drag normally associated with a droop.

"THE SNOOT" when used with a couple of wedges, will not push the tail of the boat into the water near as hard as a droop does. Instead, it uses more of the thrust to push the boat faster, rather than down.

There is more available thrust because you are not bending the water flow twice.

Increases in speed, and much better handling are some of the advantages of 

"THE SNOOT"

The SNOOT has even helped or eliminated the porpoise in several boats!!

These units will let you use your Berkeley, Dominator, Aggressor, American Turbine, 

or Place Diverter nozzles or Diverters.

 

"THE SNOOT" sells for $340.00 

It is made from 356T Aluminum and then Heat Treated.

"THE SNOOT" Installation Kit sells for $130.00, and includes; 

 SS Stud Kit, 2 wedges, &  Steering Extension.

Order Yours Today!

Various Applications Shown Below

DCP_0168.jpg (45073 bytes)

DCP_0414cr.jpg (98725 bytes)

DCP_0794.jpg (58972 bytes)

DCP_0889.jpg (39562 bytes)

DCP_0887.jpg (40373 bytes)

DCP_0888.jpg (40038 bytes) Snoot 771.jpg (61771 bytes)

----------------

  Main Pump Shaft Repair Sleeve

With this new product, you can save your old wore out main shaft.

Simply have the old shaft turned down to a particular diameter, press on the new sleeve,

drill and tap the end of the shaft, and bolt it into place with thread locker.

$48.00

Click on Picture Above for Demonstration

----------------

----------------

Mechanical Shaft Seal

Replaces The Old Rope Seal

Copy of Shaft Seal 1.jpg (88355 bytes)

Copy of Shaft Seal 2.jpg (113696 bytes)

Copy of Shaft Seal 3.jpg (100505 bytes)

Replace your old packing rings with the NEW Seal Unit. Simply install it in the packing box and forget about it.

                                                                                  -*NO MORE LEAKS OR ADJUSTING*-

Next time you overhaul your pump be sure to install the seal unit, or have your pump specialist/company install one when they go through your pump.

$89.95

----------------

----------------

LOOK!!! Jacuzzi YJ  Conversion Special!!!

$1995.00

Jacuzzix.jpg (58255 bytes)

These 12 YJ Jacuzzi Pumps Have Been Completely Rebuilt With The ENERGIZER KIT!

MEGA PERFORMANCE INCREASE

----------------

Call for Pricing


"Got to Show This! We picked this 20' Taylor up 10 MPH & made it ride like a dream, by installing one of our E-Series Add-On Shoe/Ride Plate kits, along with this snoot and diverter system." (see Shoe and Ride Plate Systems at the bottom of this page)

Below is a demonstration of the Performance up Grade. Click on it to enlarge

E-Series Performance Up Grade.jpg (130250 bytes)

----------------
 

cavita~1.jpg (45977 bytes)

Inducer DPS3162.jpg (55827 bytes)

We sell and install the HM Cavitation Reducer

$389.00

  RACE Detailed

$550.00

----------------
  
topload.jpg (74919 bytes) E-Series Pro Loader.jpg (48289 bytes)

Top Loaders for JC & JG  Series Pumps - Left

Top Loader for E & F Series Pumps - Right

Don't bet your life on a cheap imitation!

Top Loader 9813 cr.jpg (38066 bytes)

Top Loader 9815 cr.jpg (38795 bytes)

  

----------------

---------------- 

Water Bypass Kit

Water in your oil?  This could be your answer! Click on Image to enlarge.


Water Pressure Regulator and By-Pass Kit $159.95

All metal parts have been upgraded to brass or stainless steel!

The normal automotive engine is designed to work with a maximum water pressure of about 30 lbs. in the cooling system. On a jet boat where the cooling water comes from the pump bowl area, the water pressure can go as high as 200 lb. With this kind of pressure in the system, it can blow out soft plugs, push water through head and intake gaskets, and make porosity holes show up in many of the aftermarket intake manifolds. This system is designed to only allow 15 lbs. of water pressure to reach the engine. This eliminates most of the water in the oil problems that plague jet boaters.

----------------
 

Custom Hi-Tech Performance Valve Covers for BBC

$425.00

These are High Quality Triple Chrome Plated Valve Covers

----------------

Add-on Shoe and Ride Plate Kits  

    E & F Series Shoe Kit

C G Shoe Kit 293.jpg (29075 bytes)

C & G Series Shoe Kit

C G Shoe Kit 295 1.jpg (65134 bytes)

C & G Kit Installed


E Series Shoe 2315.jpg (33638 bytes)

E & F Kit Installed

1. Hi-Tech Performance "E-Shoe Kit" Add-on shoe and ride plate kit for F & E-Series Berkeley Pumps. $247.00
2. Add On Shoes for a Berkeley JC, or JG  Pumps that were not shoed before installation into the boat. $247.00


----------------

 

 

ATJ Droop 

or 

Aggressor Droop


$225.00

BBC Engine Mount and Rail Kit with Pump Braces

                      

                  

                                                                                                                                                       $575.00 Unpolished                         

 

BBF Engine and Rail Kit with pump Brace

Ford Rail Kit 800 x 800.jpg (95645 bytes)

$700.00 Polished

Pump Brace

$75.00

----------------

Flywheel Covers

These Work With the Rail Kits Shown Above

$152.00

Polished $177.00

----------------

Hi-Tech STUFfer Plate

Hi-Tech Stuffer Plate FT.jpg (73050 bytes)

Hi-Tech Stuffer Plate BK.jpg (75510 bytes)

$79.95

These Stuffer Plates are Designed to be used in

Berkeley, Dominator, Aggressor, and American Turbine Pumps

----------------

GM Crate Motors 572 cid / 620 HP make great Jet Boat motors

GM 572 4243 cr.jpg (66258 bytes) GM 572 4244 cr.jpg (67560 bytes) GM 572 4245 cr.jpg (66014 bytes) GM 572 4246 cr.jpg (64778 bytes) GM 572 4248 cr.jpg (70667 bytes)

Last one put in, turned a Dominator "AA" Impeller 5600 RPM right out of the crate!

Suction Time.jpg (136102 bytes)

 

----------------

We have had many people ask where they could buy a windshield for the Taylor SS Boats. Below is the Information.

Middy Plastic Products Inc
9320 151st Avenue Northeast, Redmond, WA 98052
(425) 883-4600

----------------

[Previous] Jet Boat pump parts
[Next] Pre-Owned Boats for sale
[Up] Home Page
[Home] Home Page
[Mail] Send EMail to Hi-Tech Performance


Hi-Tech Performance
Web Site Services and Hosting by
Web Resources

Last modified on Tuesday, August 31, 2010